Combustion Technology Portfolio

Oxy Fuel Technology

Combustion of pure oxygen instead of fuel/air mixtures remove nitrogen, inert for combustion purposes, but active in transporting heat,  offering several advantages:

- It reduces the exhaust gas volume of about 75% thus greatly lowering heat loss.
- It allows to drastically reduce the NOx emissions
- Less engineering work, as pipelines require smaller sections. Heat exchangers are no more necessary too.
- Increased productivity thanks to higher flame temperature and heat transfer ratio, and colder flue gas.
- Easier mixing with fuel, leading to more stable flames, as you have no more problems of air excess or deficit

ESA, along with its strong collaboration with the SIAD Group has cumulated a huge experience in combustion of oxygen or enriched mixes and offer today standard or fully customised and complete solutions :

“STANDARD” OXY FUEL BURNERS UP TO 5MW: 

Oxy Fuel burners High Turbulence
  • HT – High Turbulence (E3710) burners family
Air Oxy Fuel Burner Ago
  • AGO-NxT – Air-Gas-Oxygen (E3700). Air and / or oxygen burner, ideal for minimizing oxygen consumption when not required by the process, or even as a back up in case of problems in the oxygen supply itself.
  • FT – Flame Turning Burner (Bulletin in preparation): allows to direct the flame, improving the homogeneity of the temperatures in the combustion chamber, or to concentrate the heat in particular points, for example towards a load of cold ingots in a aluminum holding/melting furnace

ON-DEMAND OXY FUEL BURNERS UP TO 21 MW (OR MORE)

Special Oxy fuel Burners

Many other burner typologies can be developed and manufactured on purpose,
OXY FUEL SKIDS COMPLIANT TO PED AND EN 746

News & Events

ESA & OLSTRAD FOR AMERICAN MARKET

ESA & OLSTRAD FOR AMERICAN MARKETDEALERSHIP ANNOUNCEMENT FOR AMERICAN MARKET ESA is pleased to announce the appointment of Olsträd Engineering Corporation as the exclusive dealer for the USA, and as [more]

ADIPEC 2019: thanks for visiting us!

ADIPEC 2019: thanks for visiting us!Dear Sirs, We thank you for your visit in our stand in ADIPEC 2019 In case you require further information kindly contact our general mail [more]

Mr. Andrea Baio of ESA is the vice president of CECOF and the new president of CICOF

Mr. Andrea Baio of ESA is the vice president of CECOF and the new president of CICOFESA is proud to announce that its Engineer Andrea Baio, technical director of ESA, has been elected vice president of CECOF, the European committee [more]

Thermprocess 2019: thanks for visiting us!

Thermprocess 2019: thanks for visiting us! Dear Sirs, We thank you for your visit in our stand in Thermprocess 2019 In case you require further information kindly contact our general mail [more]